
HIRED-HAND, INC. 1733 Co Rd Bremen, AL 35033 Phone 256-287-1000 Fax 256-287-2000
Manual Part No. 4801-2984
BEARING ASSEMBLY
Rear Bearing Assemblies. Each bearing assembly consists
mounting bracket. Note the different size ends of the Front
2. Assemble the bearing parts exactly as shown in Figure 1
correct, leave 5/16” bolts and nuts loose until shaft is
set screws on each bearing
ATTACHMENT OF VERTICAL MEMBERS
orifice. (Note:
slotted).
member from the bottom. The Left member appears
-
2. Attach the Left and Right vertical members as shown in
ATTACHMENT OF MOTOR MOUNT
2. Attach the motor/motor mount assembly to the vertical members with 3/8” carriage bolts. (Note: Insert
Figure 3. Secure with 3/8” nuts.
Continued On Back →→
3. Install the motor pulley. Insert the metal key provided into
Left
Vertical
Member
Right
Vertical
Member
Orifice
Top
Slots
(For attachment of
Motor Mount Bolts)
Front Mounting
Bracket
Collars
Bearing
5/16" Bolt
Set Screw
BEARING ASSEMBLY
Rear Mounting Bracket (Sectioned)
Note: Ends Of Front and Rear Mounting
Brackets are different sizes.
Tools Required
8” Standard Wire
Pliers
Rubber Mallet
3/8” Wrench
1/2" Wrench
3/8” Drive Ratchet
3/8” Drive 3” Extension
3/8” Drive 5/32” Allen Head Socket
3/8” Drive 3/32” Allen Head Socket
3/8” Drive Torque Wrench
3/8” Drive - 3/8” Socket
3/8” Drive - 1/2" Socket
3/8” Drive -12 Point Socket
Figure 2
Figure 1
(Unassembled)(Unassembled)))
Comentários a estes Manuais